Small Foton off-road pickup snow removal vehicle configuration introduction

With the advent of winter, it is time to clear the snow on the road again. Especially in northern cities, where it snows early and winter is long, the snow on the roads should be cleaned up.

However, it is also convenient to clear the snow now, because there is a snow removal vehicle. For roads with wide spots, you can use medium or large snow removal vehicles, and for roads with narrow spots, you can use small snow removal vehicles;

For example, this Foton off-road pickup snow removal vehicle is not only convenient but also fully functional!

This car adopts the Foton double-row cross-country pickup chassis, the body of the whole car is streamlined design, and the appearance is beautiful;

It is equipped with a 238-horsepower Euro VI gasoline engine from Beijing Borgward, matching the five-speed gearbox of Foton DV525, with a maximum speed of 175km/h, and 245/70R16 tubeless tires. The ground is not easy to slip.

The vehicle is 7.3 meters long, 1.94 meters wide, and 1.86 meters high. The total mass is 2.92 tons, the curb weight is 2.595 tons, and the rated load is 0.2 tons. The carriage is 1.805 meters long, 1.58 meters wide, and 0.44 meters high.

There are snow shovels and spreaders for special installation. The spreader can choose the volume of 1200L. The outer dimensions of the snow melting spreader are 2.34 meters in length, 1.1 meters in width, and 0.86 meters in height. The spreader is 600mm above the ground and 600mm in width.

The power adopts O’Kang 2.0T gasoline engine and Hefei Changyuan’s hydraulic gear pump. The salt spread is 20~150g/m2, and the width is 1~20m, which can be adjusted.

The snow removal shovel is 2.2 meters wide, the blade is made of Q460NH, the thickness is 16mm, and the side plate thickness is 4.5mm; the operation speed of the snow removal shovel is 30-40km/h, and the left and right deflection angle is greater than or equal to 30 degrees.

You can also choose to install the snow sweeping brush with a diameter of 600mm, the left and right deflection angle is greater than or equal to 30 degrees, and the operating speed is 5-30km/h.

Performance characteristics of snow removal shovel:

1. Reasonable structure: plow-type snow removal shovel, two-way angle can be adjusted at will.
2. Reliable performance: hydraulic operation, convenient and reliable.
3. Strong adaptability: suitable for various 1-3 tons trucks. .
4. Simple operation: indoor electric control operation, convenient and reliable.
5. Unique obstacle avoidance: the upper part of the snow plow is an integral type, and the avoidance function adopts the form of an integral lower flap. When the snow plow blade encounters obstacles at any point, it can pass through, and it can avoid the snow plow when the snow volume is too large. Flip, and can effectively protect the safety of snow removal shovel and vehicles.
6. According to the cross slope of the road, the snow removal shovel blade has an automatic adjustment function.
7. Dedicated quick link device: The quick link device is adopted to make the installation and disassembly of the snow shovel convenient and quick.
8. Task lighting system: The lighting system is independent of the car body, which is convenient for snow removal at night.

Introduction and technical characteristics of snow-spreading machine:

The snow melting spreader is mainly composed of a bin, a rainproof device for the bin, a conveying device, a spreading device, a power system, and a hydraulic control system. Accessories: top rain cover, climbing ladder, tail arrow light leg.

1. The snow-melting spreader can spread a variety of snow-melting materials such as salt, sand and snow-melting agent.
2. The whole machine adopts carbon steel plate or stainless steel structure, three-level anti-corrosion treatment.
3. Hydraulic transmission, high transmission efficiency, stable and reliable performance.
4. The solenoid valve control circuit is introduced into the cab and can be operated in the cab. remote control.
5. Detachable and adjustable spreading mechanism, easy to adjust the direction of spreading and auxiliary adjustment of spreading width.
6. The whole machine adopts a special lifting support system, which can be directly used for loading and unloading
7. The filter is installed on the spreader to reduce the entry of large particles or debris into the equipment and ensure the safe operation of the organization.
8. The non-slip conveyor belt ensures continuous and even delivery of the deicing agent. The adjustable material door can adjust the amount of deicing agent delivered according to the spreading requirements.

The conveying system adopts the most advanced domestic spiral conveying method. Driven by the 3500 torque gearbox, the conveying is easy without jamming, the conveying is uniform, and the performance is stable. Especially the work is reliable and the failure rate is low.

Optimized design of the hydraulic system, the internal heat loss of the system is small. The filling and spreading can be operated synchronously, which has the advantages of high work efficiency, short cycle time and simple operation.

Folding operation is more convenient for driving without a disc at the rear of the car. There are door adjustment devices on both sides of the tailgate, which can quickly clear the excess snow melting agent in the warehouse when it stops working;

The weather with a poor sightline of double flashing arrow lights can remind the vehicles driving behind to keep the distance. Multiple safety protection devices ensure the safety of operators;

Electric control box and operating system

The spreader is also equipped with a wireless remote control system, which is suitable for long-distance operation, improves the user’s working environment, and enhances the comfort of operation; it is equipped with an electronic control throttle, which can automatically accelerate. The electronic throttle ensures the best coordination between the hydraulic oil pump and the engine speed.

This Foton off-road pickup snow removal vehicle can sweep and shovel snow in winter, sprinkle snow melting agent on the tail to prevent freezing inside, and can also transport goods in other seasons.

The snow shovel has high rigidity, good stability, stable movement, clean road machinery, and reliable work; the vehicle is light in weight and fuel-efficient, ensuring that the car body is not deformed and is economical;

The hydraulic system has the fast dynamic response, high work efficiency, short cycle time, simple operation, reliable work, and low failure rate; the snow removal roller brush has a large diameter, long service life, and convenient and quick replacement;

Spiral conveying method, etc., with strong stability, uniform distribution, and intelligent and convenient operation.