Under normal circumstances, after a period of use of the water tanker, some small water truck parts will have some minor problems to varying degrees. When repairing, the parts are bought from the manufacturer, and the outside is basically unable to be repaired and replaced, so many Customers will buy accessories from good quality manufacturers.
Below I will make a list of the accessories that can be purchased:
A power take-off, driveshaft, water truck pump, water monitor, pneumatic ball valve, solenoid valve, straight two-way ball valve, four-position three-way ball valve, filter three-way, male and female end, flange male end outlet, fire sprinkler, three bend Front flush, rear sprinkler, shower nozzle, duck beak, music horn, the transparent hose for sprinkler, etc.
After the water tanker is used for a long time, the water pressure will be low. The sprayed water is not as powerful as when it was just bought before. What is the matter with the low pressure of the sprinkler? Let’s take a look at it together:
First of all, the most likely problem is that the water tanker filter is clogged, because the water loaded in the water truck cannot be all clean tap water, it may be a dirty pool or the water pumped from the pond. NetEase was blocked by debris, such as sand and rocks, and plastic bags. Only need to remove the filter element in the filter screen and clean it, then normal work can be resumed. The location of the filter is near the sprinkler pump.
Another possibility is that the pump pressure is insufficient, causing the pump to fail to pump water. Insufficient pump pressure is usually caused by two reasons:
1. The impeller flow passage or suction pipeline is blocked, or the impeller is worn out and damaged.
2. The power is insufficient and the speed is too low.
If the impeller is damaged, the water pump needs to be replaced. If the power is not enough, just increase the throttle.