Hook lift truck, as one of the more commonly used models of sanitation garbage trucks, has a relatively high market share.
Because one truck can be transported with multiple boxes, with self-unloading function, hydraulic operation, convenient dumping and other characteristics, it is deeply favored by the garbage removal department.
At present, most of the small compartment detachable garbage trucks on the market are designed and developed for the transfer of basement garbage, and the sales volume has greatly increased after the market;
It also includes the Isuzu 3 ton hook lift truck known as the “King of the Basement”. Let’s take a closer look at this truck:
The whole vehicle is 5.64 meters long, 2.25 meters wide, 2.12 meters high, and has a total mass of 4495kg. It is a small sanitation garbage truck that can be used in the basement.
The front face of the NKR is relatively simple, with a silver chrome strip running through the middle of the black air intake grille, which looks more layered.
The vertical headlight has a large area and good lighting effect. It integrates low beam, high beam and turn signal, and the lamp supports the height adjustment function.
The NKR adopts a 1730mm single-row cab, which can carry 2 people as standard, and the interior of the cab is relatively simple. The ordinary four-spoke steering wheel, frosted design, good skid resistance, and the silver ISUZU logo is printed on the middle horn position, which is more eye-catching.
The design of the instrument panel is also relatively simple. The classic combination of double-circle instruments and LCD electronic screens, and the design of white characters and red needles allow the driver to read all aspects of the vehicle more intuitively.
The design of the center console is equally simple. It adopts a symmetrical design style, which is neat and beautiful. From top to bottom, there are air conditioner outlets, multimedia radio, air conditioner control buttons and other function buttons on the left and right sides. At the bottom is a small storage device that can be used to store tickets.
The shift lever is an MSB 5-speed gearbox, 5 forward gears and 1 reverse gear.
In terms of power, the car is equipped with an Isuzu 130-horsepower engine with a maximum power of 88KW and fuel consumption of 9L per 100 kilometers. Used in conjunction with the 5-speed gearbox, climbing is also quite powerful.
The long fuel tank, urea tank and gas storage tank with black lacquer and glaze are installed side by side in the red and black safety fence. The battery and post-processing device is safe in the safety fence on the other side. The fence material is made of Q235 material. .
The whole car is equipped with 6 7.00R16LT tires produced by the HAIDA tire company, and the rear axle of Nanjun traditional engineering vehicle has a speed ratio of 5.286, and the bearing performance is relatively good.
The 3tons Isuzu hook lift truck is equipped with a multi-way operation valve installed in front of one side of the box. Each valve body controls the extension and retraction of the boom cylinder, slide arm cylinder and outrigger cylinder of the vehicle. The operation is performed according to the operation instructions above the box. The cards operate correctly.
The remote control operation device is installed in the cab, which is simple and convenient to operate.
The pulling arm mechanism is composed of a bottom frame, a turning frame, a pulling arm hook and a locking mechanism, which can complete the hooking, hooking and unloading operations of the sealed garbage truck box.
The hydraulic system is composed of a hydraulic gear pump, multi-way valve, oil cylinder, etc., through which hydraulic power is provided for the pull arm mechanism.
Conclusion: This Isuzu 3 ton hook lift truck is relatively good in power and chassis configuration, and can meet the needs of general garbage and construction garbage removal. Of course, if you often need to work in and out of the underground garage, then this car is undoubtedly a good choice.