How is fresh milk transported in daily life? In order to meet this demand, special vehicle manufacturers have designed a special vehicle for transporting fresh milk-Isuzu milk tanker.
What’s the difference between this model and a water truck? Let me analyze it for you!
Isuzu milk tanker is also called fresh milk trucks, milk tank trucks and liquid food trucks.
Since fresh milk is an edible item, the inner tank of the frame tank is made of a food-grade 304 stainless steel plate, and the tank body can be made into 2-3 compartments.
And each milk tank is equipped with a CIP (cleaning device) cleaner, which can clean the tank after each transportation to ensure that the tank is clean and convenient for the next use.
In order to prevent the deterioration of fresh milk during transportation, an insulating layer is made in the middle of the tank body, which has a thermal insulation effect.
When the temperature difference is 30 degrees, the temperature change does not exceed 1 degree in 24 hours. The middle insulation material adopts 80 (mm) thick polyurethane foam material.
The outer layer of the tank is insulated and the protective layer is made of a 2mm thick 304L stainless steel plate. The stainless steel outer skin and trunk are beautiful in appearance, scientific in structure, light in weight and good in strength.
Each single bin of the tank is equipped with a separate stainless steel discharge ball valve and a feeding tank mouth, and a stainless steel toolbox is made outside the discharge ball valve to facilitate later use.
The top of the filling is equipped with a ventilation valve, which can be automatically adjusted to reduce the evaporation loss of the liquid and prevent the deformation of the liquid filling body when positive and negative pressures are generated in the tank;
Electrostatic grounding pads can be provided as required by the transport medium. Install a fire cover to prevent accidental traffic accidents due to static electricity and sparks;
The residual liquid in the tank is small, which meets the requirement of less than 1% of the national standard; there are many optional components;
Flowmeters, liquid level gauges, safety locking devices, anti-spill devices, etc. can be selected as required.
According to user requirements, a refrigerator, rock wool insulation, exhaust gas circulation heating, or a stainless steel pump can also be installed to make the vehicle have a suction function.
It can also realize the functions of pumping in and out, passing the meter, but not the meter, and self-flowing through the meter. A variety of configurations, a variety of options, can adapt to various market needs.
The Isuzu water truck is different. If it is transporting edible water, the tank body must also be made of a food-grade 304 stainless steel plate, which can ensure that the water will not be polluted.
When transporting cold water, there is no need for insulation, and the tank has no thermal layer. If you transport hot water, you need a thermal insulation layer.
In addition, a separate discharge ball valve and a feeding tank mouth are installed in each single bin of the tank body, and a stainless steel toolbox is made outside the discharge ball valve to facilitate later use. Or install a stainless steel pump to make the vehicle have a suction function.
It can also realize the functions of pumping in and out, passing the meter, but not the meter, and self-flowing through the meter. A variety of configurations, a variety of options, can adapt to various market needs.