I saw the aerial work truck and compared it with the previous model. The model with the same wheelbase has been technically improved, and its operating height is higher than the previous one. Take this ISUZU ELF Double cabin 18m folding boom aerial platform truck as an example, let’s take a look!
This car uses the Qingling Isuzu ELF Double cabin cab. There are two wheelbases to choose from, one is 3.36m wheelbase, the other is 3.815m wheelbase, of which 3.36m wheelbase can be made into 12-16m , This car uses a wheelbase of 3.815 meters and is made of an 18-meter high-altitude operating vehicle.
It is equipped with an Isuzu 120 horsepower engine, matched with a five-speed gearbox, air-conditioning, steering assist, multi-function LCD instrument panel, ABS, etc. as standard; 2.5-ton front axle, 4.8-ton rear axle, 7.00 R16LT 14PR steel wire tire.
ISUZU ELF Double cabin 18m Folding boom aerial platform truck is 8.6 meters long, 2 meters wide, and 3.35 meters high. The total mass is 6.625 meters, and the curb weight is 6.3 meters. The paint color of the whole vehicle is engineering yellow; the side and rear protective device materials It is Q235B carbon steel; the side and rear protection connections are welded to the frame, the rear protection section is 50mm wide, 200mm high, and the rear protection ground height is 430mm; the bottom plate is a checkered plate, which is non-slip and beautiful.
Dedicated device:
Using domestic and imported reversing valve and hydraulic cylinder, hydraulic three-section folding arm, reversing balance, flexible and convenient operation, the main boom is equipped with a lifting structure, the lifting weight is limited to one ton; upper arm, lower arm, rotation and lifting The hydraulic system is a unique stepless speed regulation system.
Four hydraulic outriggers are installed on the vehicle, and the outriggers are interlocked with the working arm to prevent misoperation and ensure the stability and safety of the vehicle during operation. The working arm can be operated up and down, 360-degree rotation, equipped with a hand throttle, and the working height is 18.5 meters.
The operation box is installed on the boom and the working platform, so that the staff can also operate at high altitude, which is very convenient. LED lighting is also installed on the working platform, so it is very convenient to work at night.
In the previous models with a 3.8-meter wheelbase, the operating height can reach about 16 meters, and the current technology can do about 18 meters. It can be seen that the aerial vehicle manufacturers have also worked hard. In this way, the practicability of aerial work trucks has been improved a lot.
Another feature of this car is that the cab is double-row seats, so you can take a few more staff members, so you won’t be afraid that you won’t be able to sit down when there are too many people, which is still very good.