Among medical waste trucks, light trucks are still popular, and there are many brands. Today, I will focus on the Isuzu ELF series medical waste truck.
The frame of the Isuzu ELF series medical waste truck is designed with high-strength steel and is lightweight, and the drive shaft, air reservoir and rear protection are all made of aluminum alloy. The load-carrying performance is improved, and the loading capacity is also better.
The overall interior of the Isuzu ELF series medical waste truck looks younger and newer. The instrument panel and seats use a unified color scheme, which is simple but not simple.
Standard air horn, air conditioner, central control door lock, electric doors and windows, remote control key (glass one-button lift), multi-function steering wheel, cruise control, air brake, 24V power supply, ABS+ASR, 7.00R16 tubeless tire, high-strength steel rim ;
This design is more convenient for our daily cleaning, and at the same time, it can reduce the driver’s visual fatigue, so that they can focus more on driving. A dual early warning system is also installed in front of the windshield of the cab, which has a higher safety factor.
This car is powered by an Isuzu 4HK1 four-cylinder diesel engine with a rated power of 72kW that meets Euro V emission standards. It is matched with a dedicated rear axle for MSB 5-speed manual transmission. The main reduction ratio of the rear axle is 4.333. The bearing capacity is assured and the driving is powerful.
This vehicle is 5.995 meters long, 2.27 meters wide and 3.3 meters high, with a total mass of 4.495 tons, a curb weight of 3.5 tons, and a rated load of 0.865 tons;
The box is 4.05 meters long, 2.1 meters wide, and 2.1 meters high. The volume of the box is 17.9 cubic meters. It is a blue-brand model.
The production of the box is the same as that of the refrigerated truck. It adopts a “sandwich” board bonding process that is assembled in pieces. The outer wall is made of 2MM glass fiber reinforced plastic, the middle is filled with an 8CM thick polyurethane insulation board, and the inner skin is made of stainless steel. Made by high temperature and high pressure.
The perimeter of the box is covered with aluminum profiles, and the corners are covered with stainless steel. A set of double doors is made on the right side and the rear of the box, which is sealed with a labyrinth sealing strip and stainless steel door locks, which are both beautiful and durable.
The car body is fully enclosed, and the back door is a double-layer airtight structure (double rear doors and an inner door are provided, and a pneumatic strut is arranged on the inner door to facilitate the upper and lower opening of the inner door). It also facilitates the loading and unloading of goods.
A refrigeration unit is installed on the top of the box body, and the LED ultraviolet light is used to control the poison. When the ultraviolet light works normally, it radiates a large amount of 253.7nm ultraviolet rays, which has a strong lethality to microorganisms and kills bacteria within 30-45 minutes. A disinfection spray device, equipped with a disinfection tank, is used for disinfection and disinfection.
Install fixed cargo slots on both sides of the inner wall of the compartment to prevent items from rolling in the compartment. The bottom and corners of the carriage should be smoothed, and the dead corners should be cleaned up to facilitate disinfection.
The bottom is close to the front inner plate with a sewage hole, and a sewage collection box is installed under the box to collect the sewage inside the box. In addition, you can also choose a handwashing tank to facilitate hand washing and disinfection.
A door alarm is also installed in the box, and a smoke alarm can also be optionally installed. It is a dangerous goods transport vehicle. The body is painted with the words “Medical waste truck”, as well as stickers with infectious items, and safety signs.
In the refrigeration unit, a minus 5-degree refrigeration unit is installed; the rear of the vehicle can also be equipped with a hydraulic tail plate to facilitate the loading and unloading of goods.
The sterilization method of the Isuzu ELF series medical waste truck is to use low-temperature sterilization, ultraviolet sterilization, and drug spray sterilization.
The car body has the properties of airtightness, anti-seepage, dustproof, etc. It has the functions of antibacterial, flame retardant, corrosion resistance, easy cleaning and disinfection.
Dangerous goods triangle lights, fire shields, fire extinguishers, electrostatic tapes and other accessories are also installed at the factory to ensure the safety of the vehicle.
Vehicle category item number: 6.2, the vehicle is used to transport infectious substances, diagnostic samples, hospital and clinic diagnostic waste and other items.
This Isuzu ELF series medical waste truck is used as a medium and short-distance transportation tool. The configuration of light truck models usually does not pursue excessive luxury but seeks practicality and durability.
As a simple and pragmatic model among Isuzu light trucks, the ELF has a reasonable and reliable configuration, strong bearing capacity and moderate power, which are all its advantages.
To have a light truck that is safe and worry-free is to have a tool for getting rich, which is a good choice!